The best advice is to turn to a professional who can guide us on the scope of the work we have to carry out. Fixing roof leakage waterproofing is a fundamental issue for maintaining roofs or roofs of homes. By fixing roof leakage, we prevent possible damage to electrical appliances due to humidity. By eliminating roof leakage in the ceilings. We avoid major problems such as roof leakage, oxidation of the tubes, and possible short circuits for users. In addition, in many cases, this presence of water combined with the lack of insulation in the roof means that mold can even appear. Which can be harmful to the health of our clients.
The exact location of the source of the problem. Which is just on the opposite side of the sector visible from inside the home: the roof’s upper (exterior) part.
One of the simplest methods is to observe the lower part of the roof (inside the house) when it has started to rain. Failing that, it is possible to simulate the effect of rain by pouring water on the roof with a hose or other similar means. The first drops of water will shine.
If we observe this, we must proceed with roof leakage waterproofing since it does not have it or is in poor condition since water is entering the home.
So, to proceed with waterproofing, you will have to follow the following steps:
- Clean the roof.
- Waterproof and insulate. Once everything is in good condition, we must waterproof the entire cover to avoid future roof leakage.
- Installation of the cover finish… And that’s it! The insulated roof.
At Samz Square we also provide waterproofing chemical in Lahore and waterproofing membrane in Lahore. You can buy this from us at cheap rate. Stay tuned with us to never miss any update.
What steps do you follow to waterproof the roof?
Before starting roof leakage waterproofing, we must identify and discover if the leak problem comes from poor or non-existent roof waterproofing with the help of a qualified professional.
Once the problem has been detected and ready to waterproof the roof:
- It is necessary to clean the surface well of branches, garbage, and remains of broken tiles. It is essential to clean the area where work will be carried out well. This will prevent tree branches. Or other objects left on the roof from blocking the gutters or forming gaps where water stagnates. Often, this type of water accumulation wears down the materials and ends up causing a leak.
- Once the entire roof has been waterproofed, it is time to take the opportunity to place insulation on the roof. This will prevent heat leakage. And in the case of inverted roofs, protect the roof leakage waterproofing.
- In this way, it is possible to protect the roof leakage waterproofing from temperature changes and the problems that the traffic of people may generate. As the sheet is protected, it will last longer. So the following humidity will take a long time to appear.
- Additionally, extruded polystyrene is one of the few insulating materials that does not degrade in water. So the cover’s insulation will last a lifetime.
- Install the tiles or the roof finish.
- We must not forget some safety recommendations. The ladder used to access the roof must be in perfect condition, firm, and safe and have the necessary length so that its top is at least half a meter above the height of the roof.
- When improving the roof to avoid roof leakage or future humidity problems due to condensation, it is advisable to install extruded polystyrene panels. This will improve the roof’s roof leakage waterproofing since it is one of the few insulating materials that does not degrade in water. The roof’s insulation will last a lifetime since it has good behavior against it thanks to its closed-cell structure. This can be a great push to sell it to our client.
